SHOT CRETE 40 is a ready-to-use, cement-based spray/hand applied repair mortar with reduced rebound
loss. It gives high early strength and reduced rebound allows for maximum application thickness with
resistivity values in the range accepted for cathodic protection (CP) overlays. It is suitable as a
repair mortar for most structural and load barring structure.
Recommended Application
Repairs to the underside of bridge decks, bridge piers and
beams, tunnels, drains, sea walls and culverts.
Refurbishment of columns, bridges, tunnels and retaining
walls
Single high build application
Mass infill to large areas.
Repairs to irregular profiles.
Benefits & key features
VERSATILE
HIGH RESISTIVITY
EASY TO USE
SHOTCRETE SYSTEM
SPRAYABLE
GOOD WORKING TIME
SPEEDY REPAIRS
CONTROLLED SHRINKAGE
FACTORY MIXED
Technical Specification
Appearance
Grey Granular Powder
Dry Bulk density
Approx. 1700-1800 kg/m³
Wet density
Approx. 2300-2400kg/m³
Water Ratio
17-18 % of Powder material
Compressive Strength
(BS 1881 Pt. 1161) 70mm cubes for CT 40 Mpa
@ 14 Days 50 Mpa @ 28 Days
Flexural Strength
(BS 6319 Pt. 3) >7.5 N/mm² @ 28 Days
Tensile Strength
(BS 6319 Pt. 7) >2.5 N/mm² @ 28 Days
Packaging
25 kg
Coverage
13.5 Ltr yield / per 25 kg bag
It also depends on the consistency and quantity of coarse aggregate added.*Part Mixing of bag is
strictly prohibited.
Shelf Life
12 months
from the date of packing. Should be stored in cool & dry condition, keep away from direct
sunlight
